11BC Chipper Chains for Mechanical Harvesters

Mechanical Harvester Chains / 11H Chains / Harvester Bars / Chains  / Harvester Chain Parts

• 11BC Chipper Chain is designed and developed for mechanical applications
• Chipper cutters have fully rounded corners and side plates
• Tested and proven chassis delivers superior strength and outstanding durability
• Patented Oregon steel material and state of the art manufacturing processes keep stretch and wear to a minimum, even in brutal cold weather conditions
• Bearing surfaces are pre-lubricated for reduced stretch and long service life. Cold Weather Note: With 3/4"-pitch chains, install a new drive  sprocket after a maximum of 2000 hours or more frequently if excessive wear or damage occurs.
• Not for use on hand held saws! Attention: READ THIS!

• Forest Equipment Co (FEC) 65" Slasher, Hydro Saw Buck
• Hudson 58" Slasher, Timberjack
• Voir Aussi Timberjack

• CSI DL-4400 59"
• CTR 42SP Slasher 58"
• Riley Manufacturing 58": 6600B, BCL-43, BCL-4300/Ultra, HG3500, HG6600/B/B-LM
• SDK Slasher 60"
• Tigercat 58"
• Voir Aussi Logmax & Woodking

• Hudson 51" Slasher, Timberjack
• Voir Aussi Timberjack
• Waratah S260 58"

• CTR Slasher 58"

• Forest Equipment Co (FEC) 1740C, 2000/T, 2550-65, 2550B-65, 2550C 58"
• Forest Equipment Co (FEC) 58" Slasher, Hydro Saw Buck

• CSI DL-4200 51"
• CSI IDT-3000 51"
• CTR Slasher 51"

• Waratah HTH220-Super Cut 52"

• CSI PTD-264 43"

• CTR 320, 426 44"
• ERI 43"
• Hahn HSG-110B, HSW-110/C, HTL-250GT, HTL-300/F 43"
• Komatsu K-Saw 43"
• Timbco 24", 28". 33" saw head
• Unicorn 43"
• Waratah Fl235 43"

• Pierce Pacific Saw HSD 3345 43"
• Rosin CF750, FH885, RD977 43"
• Timberjack Hudson 35"
• Victorian Highlands Logging Co Pulpmate 43"
• Waratah DS260, S240 40"
• Voir Timbco

• CSI PTD-143, 243 37"
• DC 38"
• E-Limb-N-Ator 38"
• ERI 38"
• Fabtek FT-180, FT-240, series 2000 13" & 18" Processor 38"
• Fortec 38"
• Hahn HPL-220/C. HSG-110B, HSW-110/C, HTL-250GT, HTL-300/F 38"
• Hultdins 350, Supercut 300, Superfell 851, Supersaws 4000S 40"
• Keto 1000, 100R, 750 40"
• Komatsu K-Saw 38"
• Lako/AFM Supercut 300, 850, 950 Premio 40"
• Riley Manufacturing 34": 2800B, DHTC-20, DM-20, HG2800B, RCDHT 20-C, RSS 5000
• Silver Streak 38"
• Timbco 24", 28", 33" saw head 38"
• Waratah Fl235 40"
• Waratah HTH626 38"

• CTR 450 (before 2005) 36"
• CTR 500 (2004 and newer) 36"
• CTR 500 Delimber 36"
• CTR Topping Saw 36"
• Hudson Timberjack Topping Saw 35" & 36"
• Unicorn 38"
• Waratah HTH-22, HTH-234, HTH-26, HTH626 38"

• Hudson Timberjack Topping Saw 34"
• Waratah D230, D240, D250, DS260 34"

• Fabtek FT-240, series 2000 13" & 18" Processor 36"
• Fortec 36"
• Hahn HPL-220/C. HSG-110B, HSW-110/C, HTL-250GT, HTL-300/F 36"
• Hytec RS6000 36"
• Silver Streak 36"
• Timbco 24", 28", 33" saw head 36"
• Waratah HTH-24, HTH626 36

• CTR 260 Stumper 36"
• CTR 314-TSC, 400 34"
• CTR 500 Delimber 34"
• CTR Topping Saw 34"
• Franklin 37"
• Lako/AFM 750 Premio 36"
• Pierce Pacific Butt Saw PTH-24 46"
• Risley Rolly II, Side Winder, Sling Shot 37"
• T&R Logging 37"
• Tigercat 34"
• Unicorn 36"
• Univer\Saw Cooley 37"
• Voir Aussie Logmax & Woodking 34"

• Danzco LCG46 34"
• DC 34"
• E-Limb-N-Ator 34"
• ERI 34"
• Fabtek FT-180, FT-240, series 2000 13" & 18" Processor 34"
• Fortec 34"
• Hahn HPL-220/C. HSG-110B, HSW-110/C, HTL-250GT, HTL-300/F 34"
• Hytec RS5500 34"

• Fabtek FT-180 33"
• Hudson Timberjack Topping Saw 31"
• Hultdins 350, Supercut 300, Superfell 851, Supergrip 4000S, Supersaws 4000S 34"
• Logmax Grangarde Maskin 7000XT 34"
• Voir Aussie Timberjack 31"

• CTR 500 Delimber 31"
• CTR Topping Saw 31"
• Franklin 33"
• Risley Rolly II, Side Winder, Sling Shot 33"
• T&R Logging 33"
• Univer\Saw Cooley 33"
• Waratah HTH-22, HTH-234 (NZ) 32"

• Koehring Waterous 32"
• Lakeside, Lakewood 32"

• Bell 32"
• Fabtek FT-180, FT-240, series 2000 13" & 18" Processor 31"
• Waratah HTH-622 31"

• Franklin 24"
• Hahn HSG-140, HSG-160 24"
• McIntee 24"
• Risley Rolly II, Side Winder, Sling Shot 24"
• T&R Logging 24"
• Univer\Saw Cooley 24"